Download

How to connect the engraving machine to

the home network WiFi via APP

Problem 1: Unable to connect to home router network.

1. Turn on the engraving machine, wait for the indicator light on the top of the engraving machine to turn from flashing to steady on, open the phone settings - WIFI search, find the WIFI name "WAINLUX_K10", and enter the password: 12345678 (as shown in Figures 1 and 2 below)

Figures 1	Figures 2

 

2. Open the "Cutlabx" APP, click the "connect" icon to enter the IP connection interface (as shown in Figure 3 and Figure 4).

 

Figures 3	Figures 4

 

3. Enter 192.168.0.1 in the IP display column, and then click the "Connect" icon at the bottom of the interface (as shown in Figure 5). The connection is successful as shown in Figure 6:

 

Figures 5	Figures 6

 

4. After the connection is successful, exit the connection interface, return to the APP homepage, click the settings icon in the upper right corner of the APP (as shown in Figure 7), and enter the settings interface (as shown in Figure 8)

 

Figures 7	Figures 8

5. In the settings interface, click the "Settings" icon to the right of the "WIFI Settings" icon (as shown in Figure 9) to enter the WIFI configuration interface (as shown in Figure 10)

Figures 9	Figures 10

 

6. Enter the name of your home WIFI-2.4G in the WIFI name input box, enter the WIFI password of your home router in the password input box, and then click the "Confirm" icon at the bottom of the interface (as shown in Figure 11 below). Close the background APP and reopen it to restart the engraving machine (this step is very important). Connect the mobile phone to the same WIFI-2.4G as the engraving machine (as shown in Figure 12 below):

Figures 11	Figures 12

7. Open the "Cutlabx" APP, click the connection icon to enter the IP connection interface (as shown in Figure 13), and click the "Search IP" icon on this interface (as shown in Figure 14)

Figures 13	Figures 14

 

8. Wait for the APP to automatically search for the engraving machine IP (as shown in Figure 15), select the searched engraving machine IP, and click the "Connect" icon at the bottom of the interface (as shown in Figure 16)

Figures 15	Figures 16