- Frame Material: High-strength Aluminum + ABS Plastic Parts
- Power System: 24V
- Wave Length: 455nm（3W、5W、10W)、1064nm(1064 1W)
- Engraving Area: 200mm x 150mm
- Maximum Engraving Speed: 7000mm/min
- Features:
- 1.FDA Certified Laser Level CLASS 1
- Active Position Protection
- Laser Beam Safety Guard
Main Features
Description
- Available Laser Modules
- WaveLenght: 455nm
- K15-3W - 48000mW
- K15-5W - 48000mW
- K15-10W - 60000mW
- WaveLenght: 1064nm
- K15-1W-1064 - 48000mW
Specifications
Documentation
Software
Video
FAQ
Product
WAINLUX X2 Laser Engraver
Motherboard
FR4 Double-Sided Fiberglass - 32 Bits MCU
Security Features
1.FDA Certified Laser Level CLASS 1
2.Active Position Protection
3.Laser Beam Safety Guard
Frame Material
High-strength Aluminum (Anodized Cold Gray) + ABS Plastic Parts
Electric Motor
35 Stepper Motors
Available Laser Modules
K15-3W - 48000mW
K15-5W - 48000mW
K15-10W - 60000mW
K15-1W-1064 - 48000mW
Wave Length
455nm（3W、5W、10W)、1064nm(1064 1W)
Focusing method
Fixed Focus
Engraving Area
200mm x 150mm
Focal Length
<60mm
Engraving Speed
0-7000mm/min
Computer Operating System
Win XP, Win 7, Win 8, Win 10 (LaserGRBL)
Mac and Linux (LightBurn)
Control Software
CutLabX (Free; Desktop app + Mobile app), LightBurn (Only Desktop App), LaserGrbl (Only Desktop App)
Input Format
JPEG/BMP/JPG//PNG/CUTLABX；DXF
Engravable Modules
3W/5W/10W/1W-1064nm
Cutable Modules
5W/10W
Available Engraving materials
Wood Board, Paperboard, Acrylic, Leather, Ceramics, Power Coated Metal, etc.
Available Cutting materials
Wood Board, Paperboard, Black Acrylic, Leather, Felt Cloth, Dark Color Plastic Sheet (Melt), etc.
Input Voltage
100-240V/50-60HZ(Power adapter)
Power Adapter Output
24V 2A（3W、5W、1064 1W)；24V 2.5A(10W)
Supported Accessories
Air pump (MD12), Honeycomb Panel, X2 Raisers, MD19 Rotary Module, MD2 Air Assist Pump Module
User Manual
The user manual is an instruction manual that describes the functions, installation and use of the laser engraving machine in detail, allowing users to understand how to use the machine.
Cutlabx APP
List of compatible software
Tutorial Videos
Why can't the pattern be engraved at all (or engraved very light)?
Imported images should be clear and the color should not be too light; Before engraving, please make sure that the focus is correct and the power, speed and time are set appropriately.
Why can't I start engraving when I press the button on the main unit during offline engraving?
Make sure there are engraving files in the root directory of the TF card is inserted.
Note: a. The machine reads the engraving file with the name 001.nc in the root directory of the TF card by default. It is recommended to delete other irrelevant files in the root directory. b. The file can be generated by LaserGRBL, LightBurn, CutLabX software, the compatible format is NC, if GC is generated by default, please manually modify the file suffix to NC.
Why can't I use the phone after the machine is turned on?
Please follow the instructions to use the phone. If the connection is abnormal due to the incompatibility of the newly released cell phone or system upgrade.Please provide a screenshot of the phone configuration and contact our customer service to get technical support as soon as possible.
Why can't I connect to the computer after the machine is turned on?
- a. Reinstall the driver, the driver shows installed, which means the driver is normal. When the driver display is pre-installed, you need to check if it is the original wiring or not connected to the machine. Please use other ports on the computer.
- b. Is the port selection correct? Some computers are connected with 2 ports. Please ignore COM1 and select another COM port. (MAC port numbers must begin with Wchusbserial to work properly).
- c. Close other software that occupies the COM port. When connecting with Lasergrbl, you cannot connect when CutLabX is turned on. You need to close Lasergrbl for it to work properly.
- d. If you purchase the whole machine with the shield accessory, you need to close the shield in order to use it normally, this way is to protect you and your family's safety, please use the equipment as required, otherwise it will not be able to connect.
- *Note: In Lightburn, the machine can store the information of more than one machine, please select the appropriate configuration information according to the model.
Why is the machine not responding when turned on?
- a. Check that the power plug at the machine end is in place.
- b. Check the electrical status of the power outlet.
- c. Check that the power switch and light shield on the machine are turned off.
What non-transparent materials can the X2 Laser Engraver engrave or cut?
- 455nm laser: Can engrave paper, wood chips, plastic, leather, fabric, cardboard, leather, stone, ceramic, stainless steel, coated metal, and most other non-transparent materials.
- 455nm laser: 5W laser power can cut 3-5mm plywood, 5-7mm pine board. 10W laser power can cut 5-7mm plywood, 7-10mm pine board.
- 1064nm laser: can engrave all metal materials, plastic, leather and other materials.
- 1064nm laser: non-cuttable.
Can you engrave on reflective/transparent materials such as ceramics/glass?
Yes, but before engraving, you need to apply anti-reflective material on the surface of the material (e.g. laser color paper, black marker) to ensure the engraving effect and prevent the reflected light from damaging the laser module.
What software is supported by the X2 Laser Engraver?
- LaserGRBL (free) - real-time
- LightBurn (paid) - real-time/offline 30-day trial
- CutLabX (free) - real time / offline / mobile
- Real-time engraving, pay attention to the computer does not crash, and do not enter standby mode (do not lock the screen), so as not to affect the engraving.